A non-destructive method for determining the relative strength development of a cement sample under down-hole temperature and pressure conditions.
Contact UsThe theory of operation is based on the correlation between ultrasonic pulse velocity in the cement sample and its compressive strength. Strength indications are determined by measuring the change in velocity of an ultrasonic signal transmitted through the cement sample as it cures.
As many as eight cement samples can be analyzed simultaneously, with the addition of autoclave assemblies specifically designed to interface with the Fann Model 304 Processor System. The Processor is the next generation of real-time data acquisition and instrumentation control.
Autoclaves
20,000PSI Pressure Rating
400degF Temperature Rating
Pressure controller
Upto 30,000PSI Automatic pressure control
Part No. 102177691 UCA System, One Autoclave
Part No. 102177696 UCA System, Two Autoclaves
Part No. 101443624 UCA System, Four Autoclaves
Part No. 102177697 UCA System, Eight Autoclaves
Available Seperately:
Part No. 101638033 UCA Processor,230 V 50/60Hz
Part No. 101002037 Autoclave, 230V, 50/60Hz
Part No. 102271450 Pressure Controller, 30,000 psig